Peer Blogs
-
Civil 3D Worldwide
Out of the tree of C3D, I just picked me a plum…
Posted: by Radomir Lazic
This came along and my project started in to humm… Well, Vegas is history now, but a humm or two never hurt anybody… This one I had a while ago with Civil 3D Implementation at a Surveying firm. We were all podding along when the AGES old issue in the form of a Surveyor, well forged in f
-
AVID USER of CIVIL 3D
Getting the CURVES in All the Right Places
Posted: by Wendy Lim
In my previous entry, I mentioned that I have been burying my nose in river engineering works. Here's the sequel to it. Rivers and channels have curves/bends. However, in most instances, channel bends are not accurately modeled due to the dearth of survey information.This is especially true when the
-
the civil chick
Fast Company: Lost in the Funhouse
Posted: by Sarah Cunningham
A simple case study about an owner, a building, an architect, and construction firm turns into a soap opera when you're talking about MIT, a new technology center, Frank Gehry, and Skanska USA. http://www.fastcompany.com/magazine/122/lost-in-the-funhouse.html What I liked about this article...
-
IMAGINiT Civil Solutions Blog
Civil 3D 2009 and the Design Criteria Editor Part 2
Today is the day that I make the second part of my two part series on the AutoCAD® Civil 3D® 2009 Design Criteria Editor available. So hopefully, during last weekend's hiatus, you had a chance to get acquainted with Part 1 of the Design Criteria Editor? What? I can't believe that you w
-
civil3d.com
Are you ready for AU 2008?
As the end of July nears and we move toward August, many of us begin to think about AU. What will it be like this year? What about the classes? Would you like to get a sneak peek at the classes?? After many disclaimers, Joseph Wurcher, the manager of AU program development provides a sneak peek at
-
Angel's Civil 3D Thoughts
Autodesk and Bentley JOINT Press Release
Posted: by Angel Espinoza
Interesting reading. Enough said.Be Better... Work well with others!
-
Civil 3D - Paving the Way
Backslash
Posted: by Scott McEachron
\ Seems simple enough. Add a backslash to a macro to pause for user selection. It's use would be something similar to the following:*^C^C_-ATTEDIT;_y;;;;\;a;0;; Add the macro to a toolbar and reset the rotation of attributes to zero all day long.One problem - the backslash isn't properly recogniz
-
CIVIL 3D ROCKS
Civil 3D Rocks Turns Three Years Old
Posted: by Dana Breig Probert
Yesterday marked the three year anniversary of my first post here on Civil 3D Rocks. I will write a lovely recap a little later, I have something miserable to finish this afternoon, but I wanted to mark the occasion before I forgot. At a glance:256 Published Posts119,110 Page Loads**58,489 Unique Vi
-
Civil 3D with Dirt Diva
Civil 3D 2008-Survey Link Installation Issues
Posted: by Melanie Santer
Hi There:Recently one of our clients had experienced some issues installing the Survey Link into Civil 3D 2008. After the link was installed when you type in "startsurveylink" into the command line you get an "unknown command" response. Another area that was checked was that AutoCAD Civil 3D 2008 TD
-
DCA to Civil 3D
Civil 3D 2009 - Missing Arrowheads
Posted: by Dave Dixon
Are you missing arrowheads on dimensions, as in can't see them on-screen or can't plot them? Then more than likely you're also using Raster Design with Civil 3D 2009, right? Autodesk has issued a HotFix for this bug. It can be found at Solid Filled Filled Hotfix.
-
Digging In...
Data Shortcut Projects from 2008 to 2009
Posted: by Danny Counts
Since Data Shortcuts have become much more friendly in 2009 and viable I might add... to boot, I do know of several of our customers that used 2008 data shortcuts in Civil 3D. We need to find out how easily Data Shortcuts setup in 2008 will transfer to 2009. What I have discovered is in 2008 if I cr
